Check This Out! Body Butter Bars!

Body Butter Bars

You'll Need
Mold (I used a silicone cupcake tin)
Double boiler of some sort
Shea Butter
Coconut Oil
Beeswax

1) Determine how much weight your mold can hold. I did this by placing my mold on my kitchen scale, hitting tare, and pour water in to the desired fullness. If you're using something like a cupcake tin, or something with multiple cavities you can just fill one and then multiply by the number of cavities. My cavities held 2 oz of water, so I needed a total of 24 oz of oils.

2) Measure oils. I decided that I would use equal parts of beeswax, shea butter and coconut oil, so I measure out 8 oz of each.

**NOTE: When buying beeswax, it's probably better to buy the pastilles or 1 oz blocks. I bought the 1 lb blocks because they were cheaper (I regret that decision). It took me 10 minutes to figure out how I was going to break down that block of beeswax. I ended up just breaking it into pieces with a hammer.**


3) Melt oils. You can do this step however you feel comfortable. Options include in the microwave, crockpot or using some sort of double boiler. My double boiler was actually a steaming pot that I set a 4 cup, glass Pyrex measuring cup in (it made for easy pouring).

I did find that the oils melted faster if I put the lid on. Also the beeswax takes the longest to melt so you might want to put that on the bottom.

This is what everything looks like when it's melted. Those little bits on top are beeswax that didn't fully melt. (Don't worry about them)

4) Pour melted oil into mold.

5) Put mold in freezer. My bars were completely cooled in 33 minutes. (I know because that's exactly how long I was exercising)

6) Remove from mold and enjoy! After taking my bars out the mold, I wrapped the ones I didn't intend to use right away in wax paper and put them in the freezer.

Check her blog out/Credit: http://ourgreenexperiments.blogspot.com/2011/03/making-body-butter-bars.html